Announcement

Collapse
No announcement yet.

Dashboard Template or Pattern 71 TR6

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dashboard Template or Pattern 71 TR6

    Hi Guys,

    Long time, No write! The taxi cab is still driving, just not as much these days. My oldest boy has been learning to drive it. My FIL and I completed his LED TS/Marker light conversion last week after shredding the dash, sending gauges to Nisonger's, replacing the TS switch, rebuilding the steering column, and putting in a three terminal led flasher...the flasher runs the TS indicator light in order to NOT use TS ballasts. This works great!

    I'm considering replacing my worn out dash (see the 15-17 year old avatar-bleck!). It is time to teach my oldest son about vehicle maintenance. It isn't going so well. I expect a bit much from unskilled hands.

    Anyway....

    I noted some time back Tom74TR6 offered patterns to any askers (I did search...here and on the Interwebs). I sent a PM to him, but got no response. Furthermore, I noted he hasn't posted in quite some time. I hope he is ok.

    So has anyone got a good pattern in PDF format? Preferably one full size, so I can print in Tile Mode and knock one out.

    Thanks in advance,
    Jim in MS

  • #2
    Ok...how about "Anyone have a decent dashboard they would be willing to trace?"
    Tape together a few legal pages, and post a few witness marks on the overlapping edges. Trace your spare dashboard, separate the sheets and scan to email...then I can print and reassemble the copy here.
    Anyone able to help?

    Thanks in advance,
    Jim in MS

    Comment


    • #3
      Jim,

      I have a beat up dash from a '73. I can do as you suggest if you can afford to wait for a bit.

      David

      Comment


      • #4
        I think I can clamp mine (70 model, same as 71) to the Corian kitchen bar (over paper ) and trace it. I might be able to do it tomorrow night, if not on Saturday.
        Last edited by RatRidgeRoadster; 07-18-2019, 10:36 PM.
        R3
        Jim Herter Copperas Cove, TX
        Original Owner ֍ 1970 TR6 ֎ CC 50990 LO
        VDU 506H

        Comment


        • #5
          Thanks much! At least I know I can start collecting wood. We are rebuilding the tail lights now. The backup "reflectors" lack shine. I'm considering some sort of chrome paint for the plastic reflectors, and then reassemble the lights into the body shell. All new gaskets and roof parts arrived. Thanks much, Gents!
          PM for that email address to send them to...or I'll PM back atcha shortly.

          Comment


          • #6
            This is exciting. I have some 50 year old walnut that I would love to make into a dash. I wonder how tight the tolerances are for the dash? Are the edges beveled at all?

            Comment


            • #7
              Edges are beveled if I remember right. I do know the glove box door is beveled a bit.
              Thanks to DG, err, David, I now have a full size pattern glued together from several sheet scans. I need to cut it out and see how well it lays over my installed dash. The hunt for good wood begins!

              Thanks David!

              Comment


              • #8
                Originally posted by TR6_Jim View Post
                Edges are beveled if I remember right. I do know the glove box door is beveled a bit.
                Thanks to DG, err, David, I now have a full size pattern glued together from several sheet scans. I need to cut it out and see how well it lays over my installed dash. The hunt for good wood begins!

                Thanks David!
                Would you be willing to share the pattern?

                Comment


                • DG
                  DG commented
                  Editing a comment
                  a4,

                  Shoot me your email and I'll forward the pattern to you. It prints on 3 ledger size pieces of paper.

                  David

              • #9
                Originally posted by a4passata6 View Post

                Would you be willing to share the pattern?
                Great thanks.

                Comment


                • #10
                  The pattern as provided printed out well enough. Once taped it was checked against the original. I'll wind up finding center on the circle cuts so the "flycutter" type bit can cut the holes round. This one is a bit down the road. Son and I just got through replacing the roof/hood this past week. He will probably become a 6-pack addict like I used to be ten years ago!

                  Comment


                  • #11
                    Originally posted by TR6_Jim View Post
                    Thanks much! At least I know I can start collecting wood. We are rebuilding the tail lights now. The backup "reflectors" lack shine. I'm considering some sort of chrome paint for the plastic reflectors, and then reassemble the lights into the body shell. All new gaskets and roof parts arrived. Thanks much, Gents!
                    PM for that email address to send them to...or I'll PM back atcha shortly.
                    I'm wrapping up the restoration of my tail lamp assemblies after years of collecting NOS lenses. Clean and polish the frame for the side marker and reverse lenses. I used Krylon Metallics "original chrome" paint that I got at Michael's craft store for the plastic tail/brake and turn signal reflector cones attached to the frames. Probably the best paint to use for this, really pleased with the results. Plenty of paint in the skinny can to do 2-3 coats for both sides.

                    Comment


                    • #12
                      Originally posted by blue_bruiser View Post

                      I'm wrapping up the restoration of my tail lamp assemblies after years of collecting NOS lenses. Clean and polish the frame for the side marker and reverse lenses. I used Krylon Metallics "original chrome" paint that I got at Michael's craft store for the plastic tail/brake and turn signal reflector cones attached to the frames. Probably the best paint to use for this, really pleased with the results. Plenty of paint in the skinny can to do 2-3 coats for both sides.
                      BB,
                      your "chrome" paint is much brighter, shinier than the Rust-Oleum I bought. I was half-tempted to return the can and try again.
                      How did you handle the foam gaskets? The ones I bought are just about too thin to make up for the "not-so-90- degree" corners of the back of the car. I suspect I will pull the assemblies again, and add foam weatherstripping to fill in the weaker seals.
                      Thanks in advance,

                      Comment


                      • #13
                        Well, it's been 10 days since this happened. I think I need more than a dashboard now. At least my son and his female companion are still their respective one pieces:

                        Comment


                        • blue_bruiser
                          blue_bruiser commented
                          Editing a comment
                          Wow, what the heck! I'm really sorry to see this, but glad everyone's OK. Hope it's not totalled.

                      • #14
                        Originally posted by TR6_Jim View Post

                        BB,
                        your "chrome" paint is much brighter, shinier than the Rust-Oleum I bought. I was half-tempted to return the can and try again.
                        How did you handle the foam gaskets? The ones I bought are just about too thin to make up for the "not-so-90- degree" corners of the back of the car. I suspect I will pull the assemblies again, and add foam weatherstripping to fill in the weaker seals.
                        Thanks in advance,
                        Hey TR6_Jim

                        Yeah, this modern chrome paint is so much better than what those paints used to claim to be. Particularly on a smooth, well-prepared surface. Perfect for this application.

                        I used double-sided scotch tape to position the frame-to-body gaskets on the frame (just to keep them from moving around too much while I mount the whole assy to the body). Mine were from TRF. The frame ended up being much closer to the body on the rear side marker area than on the rear panel portions. I may have tightened the side nuts a little more than i should have, but we'll see. I can adjust later. Also, if there are any gaps at the corner where the rear fenders meet the rear fascia, squirt a little weatherstripping caulk in there to fill in. Clear or black...
                        Last edited by blue_bruiser; 10-10-2019, 03:48 PM.

                        Comment


                        • #15
                          Originally posted by blue_bruiser View Post
                          Wow, what the heck! I'm really sorry to see this, but glad everyone's OK. Hope it's not totalled.
                          Thanks for your concern.

                          Oh, it's totalled! Oddly the engine cooling system is fine, and the engine lost only a quart while on its side. The engine cranked right up after we got it home. All the kights do work, although a few lenses were busted.

                          No fender made it unscathed, and the top frame is crushed. The car had no real interior anyway, so no loss there. The doors are beat up (skins and handles/latches only). But the doors open and close fine...even the door gaps appear OK, except for near the major skin damage. So I suspect the tub is ok...well, except for the right front inner fender and right front tub. Both will need to be replaced.

                          All wheels got bent. Wipers bent. Windshield frame and glass smashed. Front valance, hood, and trunk lid bent up too badly to re-use. Both bumpers bent. Still don't know about suspension at large (rear swing arms, rear stub-axles, front a-arms, stub axles).

                          What makes this salvageable at all is that I have all spare sheet metal for the body, and complete suspension from stripped TRs in the past. However, this one will be parked for a few years.

                          We will be stripping it and evaluating what next as the pole shed is cleared out for the "new tenant."

                          My youngest son asked if he would get it next..."Nope, Son, your older brother gets the one he totalled. You get Grand-daddy's later." One is white, one is red. The boys were thinking of a red stripe on the white car, and a white stripe on the red car...in mirror reverse-image.

                          Oh well. I'll still be lurking here as reconstruction begins.

                          ​​​​​
                          Last edited by TR6_Jim; 10-10-2019, 06:52 PM.

                          Comment


                          • Wolf76STL
                            Wolf76STL commented
                            Editing a comment
                            Wow, that's a shame, but happy to hear everyone is o.k. Metal can be replaced....kids, not so much.
                            I'm sure we'll all help any way we can, just speak up.
                            Cheers,
                            Kevin

                        Dashboard Template or Pattern 71 TR6

                        Collapse

                        Search

                        Collapse

                        There are no results that meet this criteria.

                        6-Pack Statistics

                        Collapse

                        Topics: 38,543   Posts: 479,612   Members: 8,257   Active Members: 246
                        Welcome to our newest member, thursday23.

                        Upcoming Events

                        Collapse

                        There are no results that meet this criteria.

                        Working...
                        X
                        escort ordu escort kıbrıs izmit escort bodrum escort rize escort konya escort kırklareli escort izmit escort escort halkalı erzurum escort sivas escort samsuun escort tokat escort